Home > Knowledge > Content

How to adjust the mountaineering bag?

Dec 22, 2021

The correct adjustment of the backpack not only reduces the weight burden, but also makes the backpack not easily shake, increases the difficulty of climbing, and avoids being hooked to take the whole person down during climbing.


1. Buckle your belt


The belt should be wrapped around your hip bone. After fastening, pull it to the tightest position, and keep the fastener in the middle. How tight should it be? It's best to be tight enough to shake your belt, and your meat will stick tightly to your belt and move with it.


Indeed, by adjusting the belt, 70-80% of the weight of the whole backpack can fall on the belt, and it can be easier and labor-saving to carry.


2. Adjusting shoulder straps


Adjust the lower shoulder straps. Pull down the shoulder straps on both sides in a backward direction. You don't have to pull them to the tightest point, as long as the shoulder straps on both sides are close to your shoulders. Adjust the upper shoulder belt. Pull the upper shoulder belt forward to make the center of gravity of the whole bag lean against the back. Don't pull it too tight. The backpack and the adjustment belt can be about 45 degrees.


3. Adjust chest strap


The chest strap is at the chest position below the clavicle. After fastening the chest buckle, tighten it to ensure that both hands and arms can operate flexibly and normally. The purpose of the chest strap is to prevent the shoulder strap from falling off to both sides, so as to avoid pressing the chest too tightly and affecting breathing. It is based on the principle of comfort.


When you feel uncomfortable when climbing, the backpack shoulder belt can be adjusted at any time. You can relax or tighten the shoulder belt a little at any time to transfer the force point of the shoulder.


Send Inquiry